Author Archive

Freeborn MC-57-021 Mini Pro Door Edge Detail Shaper Cutter Carbide tipped

• 3 wing
• 2 15/16” diameter
• 3/4” bore
• 1” wide tips
• Single piece cutter

Freeborn MC-57-021 Mini Pro Door Edge Detail Shaper Cutter Carbide tipped

Freeborn MC-55-003 Mini Pro Raised Panel Shaper Cutter Carbide tipped

• 3 wing
• 4 1/2” diameter
• 3/4” bore
• 5/8” material
• 15 degree shear for optimum cuts with & across grain

Product Description
Runs with 1-5/8” diameter rub bearing (AM-90-026, not included)…. More >>

Freeborn MC-55-003 Mini Pro Raised Panel Shaper Cutter Carbide tipped

Freeborn MC-62-032 Mini Pro Straight Top Groover Cutter Carbide tipped

• 3 wing
• 2 15/16” diameter
• 3/4” bore
• 2” width
• Ideal for cutting grooves, rabbets & for flush trimming.

Product Description
Use 2 15/16” diameter rub bearing for flush trim application. Counterclockwise rotation with wood fed face up…. More >>

Freeborn MC-62-032 Mini Pro Straight Top Groover Cutter Carbide tipped

Freeborn MT-57-181 Mini Pro Bottom Cutter 32mm Hinge System T-Alloy tipped

• 3 wing
• 2 15/16” diameter
• 3/4” bore
• 32mm Bottom Cutters will nest & run with most cutters

Product Description
Selection of bottom cutter should depend upon distance of bored hole for hinge from edge of door…. More >>

Freeborn MT-57-181 Mini Pro Bottom Cutter 32mm Hinge System T-Alloy tipped

Freeborn MC-62-014 Mini Pro Straight Top Groover Cutter Carbide tipped

• 3 wing
• 2 15/16” diameter
• 3/4” bore
• 7/8” width
• Ideal for cutting grooves, rabbets & for flush trimming.

Product Description
Use 2 15/16” diameter rub bearing for flush trim application. Counterclockwise rotation with wood fed face up…. More >>

Freeborn MC-62-014 Mini Pro Straight Top Groover Cutter Carbide tipped

Freeborn MC-54-001 Mini Pro Raised Panel Shaper Cutter Carbide tipped

• 3 wing
• 4 1/2” diameter
• 3/4” bore
• 3/4” material
• 15 degree shear for optimum cuts with & across grain

Product Description
Runs with 1-5/8” diameter rub bearing (AM-90-026, not included)…. More >>

Freeborn MC-54-001 Mini Pro Raised Panel Shaper Cutter Carbide tipped

Freeborn MC-51-500 Mini Pro Double Sided Cope and Pattern 8 piece Cutter Set Carbide tipped

• 3 wing
• 2 15/16” diameter
• 3/4” bore
• Cut 1/4” wide x 5/8” or 1/2” x 5/8” deep tongue & groove.

Product Description
Cuts both 1-3/8” passage doors & 1-3/4” entry doors (with center cutter changed)… More >>

Freeborn MC-51-500 Mini Pro Double Sided Cope and Pattern 8 piece Cutter Set Carbide tipped

Freeborn MT-73-006 Mini Pro Extended Corner Round Cutter T-Alloy tipped

• 3 wing
• 2 15/16” diameter
• 3/4” bore
• 3/8” radius
• For up to 1 1/4” material

Product Description
Counterclockwise rotation with wood face down…. More >>

Freeborn MT-73-006 Mini Pro Extended Corner Round Cutter T-Alloy tipped

Freeborn MC-61-003 Mini Pro Reversible Pattern Detail Cutter Carbide tipped

• 3 wing
• 2 15/16” diameter
• 3/4” bore
• Cuts from 1/2” to 7/8” material.
• 1” wide tips. Counterclockwise rotation with wood fed face up.

Product Description
After machining two pieces of wood, one piece can be inverted & plugged into its mate to form a matched joint…. More >>

Freeborn MC-61-003 Mini Pro Reversible Pattern Detail Cutter Carbide tipped

Freeborn MT-73-002 Mini Pro Extended Corner Round Cutter T-Alloy tipped

• 3 wing
• 2 15/16” diameter
• 3/4” bore
• 1/8” radius
• For up to 1 1/4” material

Product Description
Counterclockwise rotation with wood face down…. More >>

Freeborn MT-73-002 Mini Pro Extended Corner Round Cutter T-Alloy tipped